If no installations are found, then you will not be given the option to repair. if you check that dvd/cd is working properly before formatting the harddisk any how check your dvd by connecting it to your friends computer. It's always a good idea to backup your important data before making changes to Windows XP. When the "Press any key to boot from CD" message appears on the screen, press a key to start your computer from the Windows XP CD. http://softwaresecurityengineering.com/windows-xp/computer-wont-load-windows-xp.html
In this article, I will try to compile all the resources I have found for fixing this problem. All Windows updates will be lost too. You will be asked to repair an existing XP installation, or install a fresh copy of Windows XP. Each BIOS is different, but here is an example:Note: If you need assistance with a repair installation, please start a new topic in our Windows XP Forum. read this article
Please see the note at the bottom of this page (Configuring Your Computer to Boot from CD).Step 4: A blue screen will appear and begin loading Windows XP Setup from the press the F8 key to continue.Next, Windows Setup will find existing Windows XP installations. The system returned: (22) Invalid argument The remote host or network may be down.
Get the answer uptheswaSep 8, 2009, 11:39 PM Hithanks for the suggestions, i have disabled the harddrive from boot sequence leaving only the dvd as a boot option, still windows loads Note: RAID/SCSI/Unsupported UDMA users:You will be prompted to "press F6 to install any third party SCSI or RAID drivers". This is because the latest version of Windows Update is broken, and doesn't register some DLLs if they're previously been registered (as happens with a repair install). Any ideas of the problem and a fix ?many thanksjohn 6 answers Last reply Sep 9, 2009 More about windows boot drive btk1w1Sep 8, 2009, 10:22 PM Try making the only
Windows XP will appear to be installing itself for the first time, but it will retain all of your data and settings. This topic is also open for comments, but not all will receive a reply.IMPORTANT NOTE: After running a repair, you may find that Windows Update refuses to install the most recent If you have your optical drive listed first, and it's bypassing that to get to your hard drive, you may want to look for a BIOS update.Glad to hear it's fixed To do this, follow these steps:a.Click Start, click Run, type cmd, and then click OK.b.At the command prompt, type the following commands, and then press ENTER after each command:net stop wuauservexit2.Register
aford10Sep 8, 2009, 10:25 PM Try using a soft cloth and some water to wipe the disc. http://www.computerhope.com/forum/index.php?topic=104570.10;wap2 sfc /scannow – This command will scan all the Windows system files and replace any corrupted ones with working ones. You can also use the Recovery Console to enable/disable a faulty service or driver. http://www.online-tech-tips.com/computer-tips/how-to-fix-missing-or-corrupt-ntfssys-error-in-windows-xp/ You can also read the Microsoft Knowledgebase article on how to perform a reinstall of Windows XP, which goes into greater detail: http://support.microsoft.com/kb/978788 Method 3 – Replace Registry If the
At this point, you can try to fix whatever issue is causing problems. check over here never prompted to boot from CD drive. Related Windows XP - Unable to access safe mode with USB keyboard XP Won't start, not even in safe mode (Solved) Windows XP won't load and safe mode freezes! Drivers will also be reverted to their original XP versions, as well as some settings (network & performance settings may sometimes be reset to their defaults).
I've had this happen before on installs, but can't remember what finally worked. Unfortunately, there are many reasons why Windows won’t boot into Safe Mode. You can change this in the BIOS. his comment is here Please try the request again.
A CCM membership gives you access to additional options. Relax, if you follow these instructions your data will be perfectly safe.Step 3: Boot from your Windows XP CD. All Rights Reserved Tom's Hardware Guide ™ Ad choices Microsoft > Windows XP windows xp won't start in anything but safe mode. << < (3/3) pcs365_2: Hi,One of the best kept
There are several useful commands in the Recovery Console that might be able to fix the boot problem with Windows XP or Windows 7. Forbidden.You don't have permission to view this page.https://www.quora.comPlease email [email protected] if you believe this is an error. You can read the above-mentioned article, which walks through the steps to perform a repair install. or set your bios by using f10.
If you have this problem, you might want to reset the CMOS, which will reset the BIOS to factory default settlings. Here’s what you should try: 1. It requires that you activate support for this device in the BIOS: Depending on the brand of your Motherboard Look for the option: USB Device Legacy Support or All USB peripherals http://softwaresecurityengineering.com/windows-xp/system-wont-load-xp.html It happens that we make honest mistakes sometimes.